📘
TaikoHub - Dactyl Manuform User Guide
Home
Version: 2021-09-11
Version: 2021-09-11
  • 1. Introduction (Version 2021-09-11)
  • 2. About Your Keyboard (Version 2021-09-11)
  • 3. Customizing Keyboard Layout for Windows and Mac with QMK (Version 2021-09-11)
  • 4. Customizing Keyboard Layout for Linux with QMK (Version 2021-09-11)
  • 5. Hot Swapping Keyswitches (Version 2021-09-11)
  • 6. Tenting Your Keyboard (Version 2021-09-11)
  • 7. Troubleshooting (Version 2021-09-11)
  • 8. Terminology (Version 2021-09-11)
Powered by GitBook
On this page

6. Tenting Your Keyboard (Version 2021-09-11)

Previous5. Hot Swapping Keyswitches (Version 2021-09-11)Next7. Troubleshooting (Version 2021-09-11)

Last updated 9 months ago

6.1 Tenting your keyboard with plastic attachments

Insert the plastic attachments into the slots on the base plate. It's a tight fit so it helps to wiggle it in. Similarly, the attachments should be removed by wigging them out.

Don't use excessive force when pushing or pulling the attachments. It can damage the base plate.

6.2 Tenting your keyboard with screws

If you want to adjust the tenting to an exact angle, you can replace the two M3 screws with longer screws at your preferred length. The screws that came with the keyboard are 5mm in length.

Figure 6.1. Slots for the plastic attachment
Figure 6.2. Base plate with plastic attachment inserted partially to illustrate the insertion.
Figure 6.3. These two M3 screws can be replaced