6. Tenting Your Keyboard

6.1 Tenting your keyboard with plastic attachments

Insert the plastic attachments into the slots on the base plate. It's a tight fit so it helps to wiggle it in. Similarly, the attachments should be removed by wigging them out.

Don't use excessive force when pushing or pulling the attachments. It can damage the base plate.

Figure 6.1. Slots for the plastic attachment

Figure 6.2. Base plate with plastic attachment inserted partially to illustrate the insertion.

6.2 Tenting your keyboard with screws

If you want to adjust the tenting to an exact angle, you can replace the two M3 screws with longer screws at your preferred length. The screws that came with the keyboard are 5mm in length.

Figure 6.3. These two M3 screws can be replaced