📘
TaikoHub - Dactyl Manuform User Guide
Home
Version: 2022-07-01
Version: 2022-07-01
  • 1. Introduction (Version 2022-07-01)
  • 2. About Your Keyboard (Version 2022-07-01)
  • 3. Customizing Keyboard Layout for Windows and Mac with QMK (Version 2022-07-01)
  • 4. Customizing Keyboard Layout for Linux with QMK (Version 2022-07-01)
  • 5. Customizing Keyboard Layout with ZMK (Version 2022-07-01)
  • 6. Hot Swapping Keyswitches (Version 2022-07-01)
  • 7. Swapping Microcontrollers (Version 2022-07-01)
    • 7.1 Swapping Microcontrollers: Bluetooth (Version 2022-07-01)
  • 8. Tenting Your Keyboard (Version 2022-07-01)
  • 9. Troubleshooting (Version 2022-07-01)
    • 9.1 Troubleshooting: QMK Toolbox (Version 2022-07-01)
  • 10. Terminology (Version 2022-07-01)
  • 11. Changelog (Version 2022-07-01)
  • 12. Hardware Issues Tracking (Version 2022-07-01)
Powered by GitBook
On this page

8. Tenting Your Keyboard (Version 2022-07-01)

(3 min read)

Previous7.1 Swapping Microcontrollers: Bluetooth (Version 2022-07-01)Next9. Troubleshooting (Version 2022-07-01)

Last updated 9 months ago

8.1 Tenting your keyboard with plastic attachments

Insert the plastic attachments into the slots on the base plate. It's a tight fit so it helps to wiggle it in. Similarly, the attachments should be removed by wigging them out.

Figure 8.1. Slots for the plastic attachment
Figure 8.2. Base plate with plastic attachment inserted partially to illustrate the insertion.
taikohub-dactyl-manuform-keyboard-plastic-tents-step-1
taikohub-dactyl-manuform-keyboard-plastic-tents-step-2